S3600 Top Coat


DESCRIPTION: A finish coat with good alcohol, water and abrasion resistence. Available in Gloss, Semi-Gloss, Satin and Low Sheen.


USES: Primary use as a sanding sealer. Industrial applications where a fast dry time is needed. Use on furiture, decorative wood products, woodwork, and cabinets.


APPLICATION: Dip, brush, or spray. Thin with lacquer thinner.


SOLVENT: Lacquer thinner.


SOLIDS % BY WT: 25%


VISCOSITY: 20 seconds in #4 Ford cup.


DRYING TIME:

Dry to touch in 15 to 20 minutes.



HANDLING PRECAUTIONS:

WARNING: FLAMMABLE, HARMFUL OR FATAL IF SWALLOWED, CONTAINS PETROLEUM DISTILLATES.

Keep away from heat, sparks and open flame. Use only with adequate ventilation. Avoid prolonged or repeated contact with skin. Keep closure tight and upright to prevent leakage. Keep container closed when not in use. In case of spillage, absorb and dispose of in accordance with local applicable regulations. FIRST AID: In case of skin contact, flush with plenty of water; for eyes, flush with plenty of water for 15 minutes and get medical attention. If exposed to high concentration of vapor, remove to fresh air. If swallowed, CALL A PHYSICIAN IMMEDIATELY. DO NOT induce vomiting.

FOR INDUSTRIAL USE ONLY - KEEP OUT OF THE REACH OF CHILDREN.



 


Copyright (c) 1994 - 1998 ANewVision ™.,    All rights reserved