|
|
6FD100 Polyurethane
(Available in Gloss, Satin or Low Sheen)
| DESCRIPTION: |
A fast drying
modified urethane that provides excellent hardness,
mar and chemical resistance. It also exhibits good flexibility.
Adhesion is superior; nontoxic when dry. |
|
|
| USES: |
Commercial
applications such as gym floors, bowling alleys, etc.,
where heavy duty wear is anticipated. For bar tops,
tables, kitchen cabinets, furniture or woodwork. Stands
up well as exterior coating. |
|
|
| APPLICATION: |
Brush, dip,
or spray as supplied or thinned. Thin with V M &
P Naphtha to maintain fastest dry time. Mineral spirits
will slow dry time slightly. |
|
|
| SOLVENT: |
6FD100 - V
M & P Naphtha - Rule 66 acceptable |
|
|
| SOLIDS % BY
WT: |
37 |
|
|
| FLASH POINT: |
65 degrees
F |
|
|
| VISCOSITY: |
Supplied 35
seconds at 77 degrees F - #4 Ford Cup. Please note:
Viscosity will vary depending on the temperature. Do
not thin when material is cold as it is possible to
over reduce. |
|
|
| DRY
& CURE TIME: |
Air dry.
Set to touch: 15 to 25 minutes.
Dry through: 1 1/2 to 2 hours.
|
|
|
| HANDLING
PRECAUTIONS: |
WARNING: FLAMMABLE LIQUID
- HARMFUL OR FATAL IF SWALLOWED - CONTAINS PETROLEUM
DISTILLATES.
Keep away from heat,
sparks and open flame. Use only with adequate ventilation.
Avoid prolonged or repeated contact with skin. Keep
closure tight and upright to prevent leakage. Keep
container closed when not in use. In case of spillage,
absorb and dispose of in accordance with local applicable
regulations. FIRST AID: In case of skin contact, flush
with plenty of water; for eyes, flush with plenty
of water for 15 minutes and get medical attention.
If exposed to high concentration of vapor, remove
to fresh air. If swallowed, CALL A PHYSICIAN IMMEDIATELY.
DO NOT induce vomiting.
FOR INDUSTRIAL USE ONLY
- KEEP OUT OF THE REACH OF CHILDREN.
|
| |
|
|
|
|
