4297
Water Reducible Topcoat
A clear, tough acrylic
emulsion type topcoat for interior wood and plastic finishing.
Designed for use over water reducible sanding sealer. Non-combustible,
excellent adhesion, mar and UV resistance. Excellent for furniture
and cabinets.
Advantages:
Reduce with water, noncombustible, excellent adhesion, mar
and UV resistance. Lower gloss versions can be developed by
adding stir in grade silicas.
Product Usage:
Furniture, kitchen cabinets, picture frames, shelving, toys,
mouldings, display cases, water beds, novelties, most plastic
surfaces.
Product Specifications:
Wt./Gal., Lbs. . . . . . 8.5 +/- 0.1
Solids - By Weight, %. . . 31 +/- 0.1
Solids - By Volume, %. . . . 29 +/- 0.1
Volatile Organic Compound
(VOC) Lbs./Gal. . . 3.27
Viscosity, #4 Ford
@ 77 degrees F, Secs . . . . 25-30
pH. . . . . . . . . . . . . . 7.8-8.3
Cold Check Cycles,
Min. . . . . . . . . . . . . . 10
Application Data:
Reduce up to 10% with water for conventional or airless spray.
Air dry at least 60 minutes before sanding.
Force dry -- to sand -- 10-20 minutes at 120 degrees F - 140
degrees F.
Remove sand dust, then recoat.
Safety Cautions & Product Guidance:
See MSDS. Liquid coating will not support combustion.
Sanding dust must be removed before topcoating.
Agitate well before using. Stainless steel spray equipment
is recommended.
Lined steel or plastic is suggested. Protect from freezing.
