Velvit ProductsVelvit Products
   

Velvit Oil     Mailing Address:
P.O. Box 1741
Appleton, WI 54913

Description

A wood finish that stains fills, seals, protects, and beautifies all in one coat.

Uses
Apply to furniture, paneling, antiques, floors, doors, woodwork, picture frames, cutting boards, gun stocks and exterior woodwork.

Coverage
250 Sq. Ft. per gallon on the first coat.
300-350 Sq. Ft. per gallon on the second coat.
Application
Apply Velvit Oil to the wood surfaces, leave it penetrate 30 to 45 minutes. If it starts to dry out, apply more Velvit Oil, but keep the surface wet at least 30 minutes. Once it has penetrated for at least 30 minutes, start to wet sand using 320 to 400 grit wet/dry sandpaper. The sanding action creates a paste that fills the pores of the wood. Take a soft cloth and wipe off the excess. Leave it dry 24 hours. Nothing else need be applied over it.

Maintenance
Only pure Lemon Oil is recommended for polishing. Silicone or wax oils make wood susceptible to water spotting and are affected by ultraviolet light causing darkening of finish with age.

Handling Precautions
CAUTION: COMBUSTIBLE! Use with adequate ventilation. If swallowed DO NOT induce vomiting, CALL A PHYSICIAN IMMEDIATELY!

CONTAINS PETROLEUM DISTILLATES. Avoid prolonged contact with skin. Avoid prolonged breathing of vapor. KEEP OUT OF REACH OF CHILDREN!


CAUTION:::Wipe off rags & paper towels are combustible Store in a sealed metal container. Dispose properly.
     

 

Plant Address:
2434 Progress Ct.
Neenah, WI 54956
Phone:
(920) 722-8355
Email Us
 
  Site Map: Home -- About Us -- Products -- Contact Us -- Links -- Why Velvit?  
  Copyright 2010 Velvit Products Inc. All Rights Reserved